Movable Bracket

• Holds either the OPTALIGN®, and OPTALIGN® PLUS prism or ROTALIGN® and ROTALIGN® PRO receiver
• Can use either 3 or 4 hardened feet ball contact feet
• Feet slide in a groove for infinite adjustment
• Can be used on V-rails
• Supplied with guide pins for measuring "edges" S
• upplied with two 6" support posts
  • Order No. L 54

Adjustable Bracket

• Designed for any OPTALIGN®, OPTALIGN® PLUS or MASTERLIGN®
• Will also hold ROTALIGN®, ROTALIGN® PRO and SYSTEM 2 lasers
• Use to adjust beam angle
• Adjust beam ±2° vertically and horizontally
• Can be mounted to any vertical post from 5/16" to 3/4" diameter
• Can be mounted to Prüftechnik 8mm dia. support posts
• Supplied with two 6" support posts
  • Order No. L 542

Fixed Bracket

• Holds ROTALIGN®, ROTALIGN® PRO and SYSTEM 2 lasers
• Can be mounted to any vertical post from 5/16" to 3/4" diameter
• Can be mounted to Prüftechnik 8mm dia.support posts
• Supplied with two 6" support posts
  • Order No. L 543

Magnetic Base

• 1/2" dia. support post
• Fits V-rails, round rail and flat surfaces
• Very strong magnet attraction, 192 lbs. on flat surface.
• For use with L 542 and L 543
  • Order No. L 544

Long Range Bracket (over 33 ft.)

• Holds ULA laser
• For use only with ROTALIGN® PRO firmware
• Use to adjust beam angle
• Adjust beam ±2° vertically and horizontally
  • Order Nos. L 544, L 542 and L 548