Compact Chain Bracket
The compact chain brackets can be used on shaft diameters ranging from approximately 1/2" up to 8-1/2" (up to 20" diameter with optional 1500mm long chain ALI 2.116). A minimum clearance of 25/32" is required along the shaft or coupling hub axis to mount the bracket without interference. Accepts all standard lengths of support posts for maximum versatility.

• Order No. ALI 2.107set (set of 2 pieces, each with 300mm and 600mm chains)
• Order No. ALI 2.891set (set of 2 pieces, each with 300mm and 600mm chains, and 20 support posts in storage pouch.)
• Chains
  • Chain, 300mm long with threaded rod for shaft dia. up to 3-1/2"
    Order No. ALI 2.114 (1 piece)
  • Chain, 600mm long with threaded rod for shaft dia. up to 8-1/2"
    Order No. ALI 2.115 (1 piece)
  • Chain, 1500mm long with threaded rod for shaft dia. up to 20"
    Order No. ALI 2.116 (1 piece)
    

    ---

Magnetic Bracket
With four powerful magnets providing instantaneous easy mounting of laser or prism against solid coupling hub, this bracket requires only 3/8" clearance along the shafts. Allows interchanging support posts for most convenient height, as desired.

• Order No. ALI 2.112set (set of 2 pieces)
• Order No. ALI 2.112 (1 piece, one side)

Stationary Position Adapter
For non-rotatable shafts. Fits hub, coupling or shaft diameters 3-1/8" and up. Used with magnetic brackets ALI 2.112SET. Use only if shaft rotation is impossible! Accuracy of readings depend on surface condition of coupling, hub, or shaft. Also used to center magnetic brackets on large diameter couplings, flanges or shafts.

• Order No. L 210 for OPTALIGN® IR and OPTALIGN® V (1 piece, one side, includes vertical fine adjustment device.)
• Order No. L 220 for ROTALIGN®/PRO and OPTALIGN® PLUS (1 piece, one side)

Magnetic Sliding Bracket
The magnetic sliding bracket is a specialty bracket that allows measurement and alignment to be performed when one or both shafts cannot be rotated. It is placed against the back of the solid coupling hub or front face of the uncoupled shaft and slides around from one measurement position to the next. Suitable for shaft and coupling diameters from approx. 3-1/8" up.

• Order No. ALI 2.230 (1 piece, one side)

Coupling Bolt-Hole Bracket
The bolt-hole brackets are specialty brackets for very large couplings with bolt holes greater than 1-3/4" diameter. They can be mounted on the back or front of any ferromagnetic coupling.

• Order No. ALI 2.106set (set of 2 pieces)
• Order No. ALI 2.106 (1 piece, one side)

Narrow Bracket
Only 5/16" thick, these brackets offer an ideal solution to tight squeezes between coupling and machine housing. The system contains:
1 set (2 pieces) for shaft dia. up to 3-11/16"
1 set (2 pieces) for shaft dia. up to 6-1/4"

• Order No. LUD 2.109set

Narrow bracket system (set of 2 pieces) for shaft diameters up to 3-11/16" only, available under Order No. LUD 2.109LSET

• Order No. LUD 2.109
  (1 piece for shaft dia. up to 6-1/4", one side)
• Order No. LUD 2.109L
  (1 piece for shaft dia. up to 3-11/16", one side)

Sliding Bore Bracket
The magnetic sliding bore bracket is a specialty bracket that allows bore measurement. Suitable for bore diameters from approx. 6.5" to 22". Allows interchanging support posts for most convenient height, as desired.

• Order No. L 520 (1 piece, one side)

Belt-Type Bracket
The belt-type brackets can be used on shaft and coupling diameters of approx. 5/8" to 8". Built-in spirit level indicates vertical mounting position. Accepts all standard lengths of support posts for maximum versatility.

• Order No. ALI 2.888set (set of 2 pieces, each with 1m tension belt, and 20 support posts in storage pouch.)
• Belts
  • Tension belt, per meter
    Order No. ALI 2.270
  • Tension belt, 1m (3 ft.) long for shaft dia. up to 8"
    Order No. ALI 2.270-1 (set of 2 pieces)
  • Tension belt, 2m (6 ft.) long for shaft dia. up to 16"
    Order No. ALI 2.270-2 (set of 2 pieces)

Support Posts

• Support post, 115mm (4-1/2")
  Order No. ALI 2.170 (1 piece)
• Support post, 150mm (6")
  Order No. ALI 2.171 (1 piece)
• Support post, 200mm (8")
  Order No. ALI 2.172 (1 piece)
• Support post, 250mm (10")
  Order No. ALI 2.173 (1 piece)
• Support post, 300mm (12")
  Order No. ALI 2.174 (1 piece)

Offset Support Posts
The offset posts allow use of magnetic brackets on large. flat surfaces (such as coupling faces). Also fit all our other quick-fit brackets. Length 7-1/8".

• Order No. ALI 2.2118 (1 piece)

Cardan Bracket
This bracket allows convenient and accurate alignment of machines joined by cardan shafts over separations of up to 10m (33 ft.) and shafts offsets of up to 900mm (35-3/8") using ROTALIGN®/PRO

• Order No. ALI 2.893set